. manual
Track Settings
Double-taping the [track] button will open the track settings page.
​
The menu is structured in horizontal rows
​
Track Type
ROW 1 sets the track type:
​
[step 1] = Note
[step 2] = Modulation
​
hold [step] and turn the [pot] to set the Midi CC number
​
[step 3] = Drum
hold [step] and turn the [pot] to set the Note number
​
You can use a note from the key menu as an alternative way of selecting the desired note for your drum:
Put your track in the Note Mode. Then select the note you want to use on the [key] menu and finally set the track to Drum.
Clock Mode
ROW 2 sets the clock mode of the track:
​
[step 5] = Main Clock
[step 6] = Triggered
​
hold [step] and turn the [pot] to set the source:
​
[step 1 to 12] = internal Track's trig'
​
[step 13 to 16] = external Gate in 1 to 4
​
[step] 7 = Coupling track to another
​
(The pattern reading of the selected track will follow the pattern reading of the track that it is coupled to)
​
hold [step] and turn the [pot] to select the track to follow
Reset Mode
​
​
ROW 3 set the reset mode of the track:
​
[step] 9 = No reset
[step] 10 = Trigged
hold [step] and turn the [pot] to set the source:
[step 1 to 12] = internal Track's trig,
[step 13 to 16] = external Gate in 1 to 4
​
[step] 11 = Reset on 1st step of the source track
hold [step] and turn the [pot] to set the source: [step 1 to 12] = internal Track's first step.
Outputs
Hold [step 13] and turn the [pot] to set the MIDI channel output [1 to 16]
​
Hold [step 15] and turn the [pot] 15 to set the CV output [1 to 4]
​
Hold [step 16] and turn the [pot] to set the Gate output
[1 to 8]
​
Play Mode
press [step] 14 to switch between play mode:
GREEN the track is played normally
​
RED the track is played manually :
​
To play the track in Manual play mode :
Go to the [track] menu and activate the [performance] Mode.
​
Then just press the [step] coressponding to the track you want play manualy.
​
Hold [step] for as long as you want it to play.
​
If you want the track to keep playing, then just hold [shift] before releasing [step].
Main Clock Setting
Double-taping the [pattern] button will open the Main Clock Setting.
In ROW 1 set the Main Clock source:
​
hold [step] and turn the [pot] to set the source:
[step 1] = internal
[step 2] = MIDI in